Get The App From Play Store!

Skip to main content

Fan Oven Element - 2500W Stock Number: ES1019719

High quality spare part for select models of Stoves, Belling, Cannon, Creda and Hotpoint ovens

Read more

Manufactured by Electruepart

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

High Quality Replacement Fan Oven Element - 2500W

The function of the fan oven element is to heat the oven cavity. When the cooker knob is turned on for your electric cooker, electricity will flow to the element which then proceeds to heat up. Once the element reaches the desired temperature, the electricity flow switches on and off to maintain the temperature.

If the internal element filament burns out, this can cause the element to short circuit - and will lead it to fail. Potential signs that the element has blown can be visual things, such as a split, bulge, or blow hole on the element.

eSpares has the replacement fan oven element, that could soon be yours, to help get your fan oven back to the required temperature - so you can continue to make your delicious meals!

Specification:

  • 2500 watts
  • Height: 235mm
  • Width: 255mm
  • Bracket: 70mm
  • Tags: 38mm
  • 2 Turn
  • End to centre bracket: 220mm

Compatible spare part for select models of Stoves, Belling, Cannon, Creda and Hotpoint ovens.

Please check the list of suitable models to ensure that this spare part will fit your appliance.

Ask a Question

13 Questions and 13 Answers

My oven is built in. Can I just switch off at mains to replace element

By Sylvia marshall - Coulsdon surrey - 13 April 2017
  • Dean from eSpares
    Dean at eSpares says...

    Hi Sylvia, always make sure that the oven is turned off at the mains before replacing the element

Answer this question

Creda C261ew Control knob in off position Oven is still on and when door shut, fan spins also. Turning off at mains and fuse board for period of time doesn't seem to clear the problem either

By Lee - Bucks - 27 February 2017
  • Chris from eSpares
    Chris at eSpares says...

    Examine the switch (ES836013) contacts for damage or burning and replace if required. If the switch is OK suspect the thermostat ES188322

Answer this question
By P Sheppard - Huntingdon - 05 February 2016
  • Chris from eSpares
    Chris at eSpares says...

    For information on your repair see our video: How to diagnose problems with your oven: www.espares.co.uk/advice/1/2145

Answer this question

all cooker works apart from oven dosent get very warm.was working and then had power cut.now not very hot

By lorraine - kent - 05 May 2015
  • Chris from eSpares
    Chris at eSpares says...

    For information on your repair see our video: How to diagnose problems with your oven: http://www.espares.co.uk/advice/1/2145

Answer this question
By chalkie - - 09 February 2015
  • Chris from eSpares
    Chris at eSpares says...

    To remove the door lift up the hinge locking catches as shown in our video: http://www.espares.co.uk/advice/1/2754 Then with the door open hold either side and use your thumbs to push the hinge sprung arms as you lift the door and the bottom latch plates away from cavity and unhook the arms as you lift away.

Answer this question
See all questions and answers

Will this part fit my appliance?

Check Now

Fan Oven Element - 2500W

15.71
(inc. VAT)
15.71