Tumble Dryer Heater Element - 2500W Stock Number: ES1020673
High quality compatible spare part for select models of White Knight (Crosslee), Whirlpool and Tricity Bendix tumble dryers
Manufactured by Electruepart
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
High Quality Replacement Tumble Dryer Heater Element - 2500W
If your clothes are damp after a cycle it could indicate a fault with the heating element. Ensure your dryer is heated up with this genuine replacement. eSpares could soon have your dryer producing those warm and dry clothes you were used to!
Specifications:
- 2 Turn
- 2500 watts
- Height: 399 (mm)
- Width 360 mm
High quality replacement part for select models of White Knight (Crosslee), Whirlpool and Tricity Bendix tumble dryers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
Customer reviews can help you out if you're having any problems with the fitting of the part.
5 Questions and 9 Answers
ive got a whiteknight dryer that the heating is not working taken a look one of the elements is broken but if its fitted with 2 elements are these element linked to gether so that if one brakes then both dont work please email back with you apinion cheers
- Elements are linked together electronically so if one is broken then the other won't work - you can't buy then seperatly anyway
- Hi.If If one element is broken the other should work if on the high setting.If it dose not both elements are broken.They come as a pair linked together any way.Hope it helps.
- yes the heater element comes with both elements as 1 part so order the whole thing will work like agood one once replaced easy to fit as well. this is th problem my dryer had
- This dryer is twin element mounted together. Additional terminals allow selection of high or low heat setting.
please could you tell me which wires go where thank you
- No i have not got a diagram.I wrote down what wires went were before I disconnected the old element.The blue wire went to the spade that is strapped to 2 terminals 2 black wires went to another spade and 1 red to another but i cannot remember wich way round.Ihope this helps
-
Rory at eSpares says...
Hi Markj, I wouldn't want to give you any dodgy advice! This element fits many different dryers, each with slightly different wiring systems. I wouldn't like to give any advice to you that might not be right for your dryer and therefore be dangerous.
-
Chris at eSpares says...
There are two heating elements joined on one side. Each element is likely to be between 60 and 40 ohms approximately in resistance.
no lights on panel showing can you help please
-
Chris at eSpares says...
For information to diagnose your problem see our video: How to Diagnose Tumble Drier Control and Program Problems http://www.espares.co.uk/advice/9/2049
Took all the screws out of the Backing & still can not get to replace the heater Element. The screws in back panel ones in the centre needs to come out but with hand held screwdriver its a no go. any suggestions
- Assuming you mean the three bolts holding the main bearing - try laying the dryer down on its front then you can get a bit more purchase. Worked for me.
Will this part fit my appliance?
Check Now
