Washing Machine Module (Programmed) Stock Number: ES1114059
Genuine spare part for select Hoover washers
Manufactured by Hoover
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
If your PCB module isn't performing as it should then this replacement might be what you need.
This control module will fit to your washing machine down the right hand side, so if your washing machine has been behaving a bit erratically lately, get this control module replaced, and it's sure to get your washing machine up and running again.
This is a genuine spare part and will fit the models of Hoover appliances listed. Prior to ordering please view the list of compatible models to ensure this part is suitable for your model.
3 Questions and 3 Answers
This blows about every 18 months Hoover usually call and replace it, but they usually state it needs programming on site. Is your replacement programmed and just a replacement part or will I also need Hoover to attend to program the Pcb. Before I part with the money I would like some reassurance or this machine goes on the tip.
-
Chris at eSpares says...
This is a programmed module that does not need additional setting up.
My machine tripped the breaker towards the end of a spin cycle, now will not start any programme and shows flashing door security light. The door lock is working and requires the time delay before it will allow opening. Is the pcb the most likely fault? 1 Answer
-
Chris at eSpares says...
Check the motor brushes before suspecting the control board.For information to diagnose your problem see our video: How to Diagnose Washing Machine Control and Program Problems www.espares.co.uk/advice/7/1793
my washing machine only works on certain settings could this be a problem with the pcb board 1 Answer
-
Chris at eSpares says...
The actual selector switch Stock Number: ES670428 is a common cause for this type of problem and is more likely to cure it.
Will this part fit my appliance?
Check Now
