Vacuum Cleaner Internal Hose Assembly Stock Number: ES1117454
Genuine spare part for select models of Dyson vacuum cleaners
Manufactured by Dyson
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Will this part fit my Appliance?
This product is compatible with:
- Dyson DC07 Vacuum Cleaners
- Dyson DC14 Vacuum Cleaners
Vacuum Cleaner Internal Hose Assembly
If your Dyson has lost suction, it might be due to a tear in internal hose. Replacing a damaged hose couldn't be easier and you should see an immediate improvement in your vacuum cleaner's performance. With this replacement you’ll be spring-cleaning the house in no time!
Please note: This short hose is located on the underside of the Dyson vacuum cleaner, not to be confused with the hose located to the rear of the cleaner.
Genuine spare part for select models of Dyson vacuum cleaners.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
3 Questions and 5 Answers
i have looked at my dyson and I can't see how to get the hose off of the machine. Please can you advise me on how to fit this. Thanks
- Haven't you had an answer yet, Ness? Grip one end, twist until it moves, then pull. Then the same at the other end.
- you have to take bottom cover off the brush there are three plastic half turn bolts then push drive belt off at the motor shaft pull brush out with belt,pull brush cover with hose assembly out ,unscrew hose off screw new one on, put drive belt back on motor shaft ,refit brush cover and pull belt back though it, pull belt so you can push brush though it, re fit the brush,refit the bottom cover
- Take the plate off the bottom. Use coin to turn screws. Prise off old hose where the push fit is, and unscrewother end. Replace push fit. In theorey you line up the plastic screwtube threads, and twist. One end of the pipe is a left hand thread, the other RH. In practice you need to juggle, but it will fit and screw home eventually. Then put everthing else back.
I have ordered a clutch from espares. on removing i inadvertantly pulled out the black rubber ring that the grey end of the hose goes into. which one of the 2 holes does it belong to and whitch side does the hose go into
-
Chris at eSpares says...
Use the following link to view a video that will show the position of this hose: https://youtu.be/mwcLnjpn9Tg?t=1m18s
Required for another application. ( Bissel carpet washer)
-
eSparesMalindi at eSpares says...
We do not usually put up measurements as our parts are model specific. This part is made specifically for the Dyson models listed above. Please check your model details to make sure you get the correct parts. The following link may help you: http://www.espares.co.uk/findingmodelnumbers.aspx
Will this part fit my appliance?
Check Now
