Small Ceramic Hob Hotplate Element - 1200W Stock Number: ES1248464
Genuine spare part for select models of Tricity Bendix, Zanussi and Electrolux cookers
Manufactured by Tricity Bendix
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Small Ceramic Hob Hotplate Element - 1200W
If there's no heat being emitted from your hotplate, then it's very likely that the element has blown. No problem, you can fix the issue with this replacement part from eSpares. Here we have a genuine replacement ceramic hotplate element, which, once fitted, will have your hotplate firing on all cylinders once more!
Specification:
- Type: EGO 10.54111.042
- Wattage: 1200W
- 240 Volts
- Power Level: Single
- Upper Outer Diameter: 165mm
- Upper Inner Diameter: 140mm
- Underside Inner Circle(Seat): 145mm
Genuine spare part for select models of Tricity Bendix, Zanussi and Electrolux cookers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
2 Questions and 2 Answers
Your suggestion didn't solve problem, I substituted both a new (bought from you) and one other regulator from the existing regulators on the hob. every time it comes on full and cannot be controlled. Maybe you have a wiring diagram I could look at ? 1 Answer
This is on a cooker at my Mother's ( 250 miles away)who I'm not able to visit that often, hence the time gap between questions
-
Chris at eSpares says...
Regulators work by using a small heater inside that when 'on' heats and causes a bimetal strip to cut off the power. This time till it cuts of is varied by the knob position. If the controls have lost there 'neutral' the heater will not heat and not cut off. Check on the working control for which connection is short to the neutral of the terminal block at the back. The same connector on the non working controls should also be connected to this connector.
Is there a different wiring connection for this compared to original, new one comes on full at first connection and doesn't operate according to control 1 Answer
DSIE 456GR 948518032
-
Chris at eSpares says...
There should not be any difference in the elements and it may be the case that the controller has been damaged by the failure of the element and needs replacing. You can check and prove this by swapping the element with another ring and comparing the results.
Will this part fit my appliance?
Check Now
