Breadmaker Connector Joint Stock Number: ES1623171
Genuine spare part for select Panasonic breadmakers
Manufactured by Panasonic
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Breadmaker Connector Joint
If you need a new connector for your breadmaker, this genuine Panasonic spare may be just the part you require.
Prior to ordering, please check the list of appliances this fits to ensure it is the right part for your appliance.
5 Questions and 8 Answers
I too would love to know how to replace the connector joint on the Panasonic breadmaker model Sd-253? Would be nice if this was readily available as would save time in me experimenting! 3 Answers
- Mrs H J Walker covers most of the job, but I found there was no need to "unscrew from the inside of bread maker and take out the whole section". Once the bottom plate is removed, and belt taken off (as per the helpful youtube video), I simply unscrewed the nut attaching the big belt pulley, removed the pulley, carefully removed the circlip round the shank of the old connector joint, removed the washer then gently tapped out the old connector joint from the outside into the bread maker. The new connector joint is pushed through from inside towards the outside, washer and circlip reattached, then the pulley and tighten its nut. Re-fit the belt, screw on the bottom plate and your back in the baking business! Thanks spares!
- Got my husband to sort thank you. Yes you need to remove the bottom plate and take off the belt. Also need to unscrew from the inside of breadmaker and take out this whole section. Remove disintegrated connector and replace with new one! Really pleased to have my ten year old breadmaker back in use.
-
Chris at eSpares says...
We do not have any information on fitting this part but if you watch our belt video: www.youtube.com/watch?v=M7-k7osrLAg We think this part will have to be taken off the large belt pulley.
- There are 4 screws in the feet. - There are additional screws in the panel where the cable fits through. There is a screw in the bottom of the hinge. Once these are removed, you can slide the base from the top. Turn the machinery over. You should see a motor, a drive belt and a second spindle. Remove the belt - it should stretch enough to jump off the pulley. Unscrew the nut ( about 8mm) on the larger wheel. There is a washer and a rectangular plate to remove. This exposes the bottom of the part in question.remove the large wheel - careful it is a bit fragile! There is a split-cover shaped like a horse-shoe in a groove at the base under the threads. This needs to be prized off with a screwdriver or pliers or both. Once this slides free, the connector joint can be gently tapped and should fall through the hole. - Reassembly is the reverse. So connector through hole, split pin, wheel plate, washer, nut, belt, reassemble and screw together. - Good luck. hope this helps. - A second person to hold the parts is recommended, but not essential! - keep all the parts in a safe place.
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
SD-ZB2502 I have tried several times but the bread maker is not starting. Any suggestions?
-
Parminder at eSpares says...
Sorry but we cannot find any information on this from your model number or user manual.
bread has a crust on 80% on left side ol loaf but remaining 20% seems only just about cooked is there a fault with the heaters 1 Answer
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
Of the bread maker that the pan fits onto? I have a Panasonic sd 257
-
Kaasim at eSpares says...
Yes, this fits onto the base of the Breadmaker.
Will this part fit my appliance?
Check Now
