Tumble Dryer Heater Element - 2300W Stock Number: ES1642304
Genuine spare part suitable for select models of Hotpoint and Indesit tumble dryers
Manufactured by Hotpoint
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Tumble Dryer Heater Element
If your clothes are still cold and damp after a cycle in your tumble dryer, eSpares could soon get your tumble dryer back to its full working performance. A faulty element will impact on how dry your clothes are during the cycle.
The element is responsible for creating the heat that will dry the clothes within your appliance, so without this part working properly your tumble dryer won't be doing what it should. eSpares could soon get you back to nice dry clothes again, with your tumble dryer performing at its best, in no time!
Specification:
- 2300W
Genuine spare part suitable for select models of Hotpoint and Indesit tumble dryers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
4 Questions and 4 Answers
Hi does this part come with thermostats fitted (picture looks as if there are thermostat fitted) 1 Answer
I live in Guernsey the channel islands do you take V. A. T. off as we don't pay VAT over here
-
eSpares Staff at eSpares says...
This part does come with the thermostats fitted as shown in the picture.
Hi guys, looked up fault code on Hotpoint website and seems to relate to heating. Would you be able to advise if this is a heating element issue before I buy the wrong part? Thanks in advance
-
eSpares Staff at eSpares says...
Error code F08 does refer to a heater fault, test the heater with a multimeter to confirm it is faulty before replacing.
It is throwing up fault code F04 . I have checked both thermostats they are reading 0.03 ohms. The rear Thermic resistor is not budging from .1 on the meter also no continuity on the test I am right in my diagnosis that this is the fault ? 1 Answer
-
Dean at eSpares says...
Please see our advice centre article for help www.espares.co.uk/advice/careandmaintenance/hotpoint-tcl-tumble-dryer-error-fault-codes just copy and paste into your browser.
Fault code seems to be heater related. Checked continuity of heater parts seems OK but Dryer Rear Thermistor [your part number ES1668475] is closed. Would this be what gives the F03 fault code? What else needs to be checked and or replaced?
-
Dean at eSpares says...
F03 is related to the Front thermistor faulty, the cause can be the thermistor (heating sensor) in your tumble dryer. You’ll need to look into the J12 module connector, the thermistor itself and the connections and wiring between the two.
Will this part fit my appliance?
Check Now
