Washing Machine Drum Paddle Stock Number: ES169596
Genuine spare part for select models of Hoover, Candy and Zerowatt washing machines
Manufactured by Hoover
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Drum Paddle
If your washing machine could do with a brand new drum lifter to get your clothes as clean as can be, once more, then why not take a closer look at this spare part here. With this replacement you can ensure your clothes will be circulated inside your drum, to get the best performance out of your washing machine.
Genuine spare part for select models of Hoover, Candy and Zerowatt washing machines.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
You may need a Torx screwdriver to fit this part. On some models the paddle is fixed with an additional stainless steel screw you can access by removing the sump hose. Use 'Blue-tac' to hold the screw on the end of the screwdriver as it is not magnetic.
4 Questions and 7 Answers
- Its also quite easy to take the machine outside, drain all the water and carefully tip the machine on its side on an old towel or something to avoid scratching. Some how it seemed better than having the machine above my head!
- Lift the machine onto two chairs - be careful two man job - remove water outlet hose rotate drum so screw (hex screwdriver) is visible remove screw from inside of drum slide paddle to release
- remove the screws
Do I need to take the drum out to fit this part or does it simply click in to place? Please advise Thanks
- On my Hoover HNL-6166 there is a screw holding the paddle to the drum. You can gain access to the screw by removing the drain pipe and revolving the drum to line up with the hole. You need an Allen key and it's quite fiddly but it can be done
-
Rory at eSpares says...
Hi Honeyfox Drum paddles are easily replaceable and just click on. The drum can rest happily in place whilst you do this!
hi before i buy a paddle i was just wondering how easy it is to fit as i have read different reviews online some say you need to life the machine and remove hoses etc and some are like your hotpoint video just 3rd hole pin pull and replace.
-
eSparesMalindi at eSpares says...
We cannot advise beyond the help video on our website unfortunately. If you do require further assistance, please contact Hoover/Candy directly or a technician for support. http://www.espares.co.uk/advice/washing-machines/a/7/1270/how-to-fit-a-washing-machine-drum-paddle.html
Bought a paddle for Hoover hnf6167 from you this week,opened base of machine but can see no way of getting to drum as it looks like it is encased in hard plastic shroud which is bolted together.When I spin the drum the only indication I have that itis turning is the belt at the rear going around the pulleys.HELP! Many thanks
- Remove water outlet pipe. You can access the fixing screw ( hex screwdriver)
Will this part fit my appliance?
Check Now
