Get The App From Play Store!

Skip to main content

Washing Machine Drain Pump Assembly Plaset 69132 Stock Number: ES489646

Genuine spare part for select models of Ariston, Creda, General Electric, Hotpoint and Indesit washing machines

Read more

Manufactured by Indesit

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Washing Machine Drain Pump Assembly

Your washer's drain pump is in charge of pumping water from the drum of your machine into the drain hose. If your washer isn't draining properly during wash cycles, your pump may have given up the ghost. Replace it with this spare from Indesit to get back to business.

Specification:

  • Type: Plaset 69132
  • 30 watts
  • Voltage: 220-240v
  • 50Hz

Genuine spare part for select models of Ariston, Creda, General Electric, Hotpoint and Indesit washing machine. 

As with all spare parts please check the list of compatible appliance models prior to ordering.

Ask a Question

2 Questions and 3 Answers

By munchies - Glos - 16 July 2009
  • From very recent experience water spewing out of the powder dispenser could also be a blocked filter, which Hotpoint don't mention in the machine instructions. Filter found at back of WMA74, behind panel at bottom of machine and then you will see pump with feeds in and out. Undo two metal screw clips on large black pipe and the plastic clip connector to the pump, it all should come apart fairly easily. Clean out plastic bowl and replace! By Anonymous - Stockport - 05 January 2013
  • eSparesMalindi from eSpares
    eSparesMalindi at eSpares says...

    Yes that is a possibility, however not the only possible reason for this. Theis page may be of help: http://www.espares.co.uk/advice/washing-machines/a/7/30/common-washing-machine-faults.html#leaking

Answer this question

Washer refuses to drain! Despite no blockages, anywhere, new pump and kink free sump hose, the only way the pump will activate is if I squeeze the sump hose mid cycle; this seems to trigger the pump into action and the cycle continues. Without this intervention, the washer eventually just stops with the drum full of water. Help!!!

By Michael P - Sheffield - 09 May 2015
  • Chris from eSpares
    Chris at eSpares says...

    The sump hose Stock Number: ES487846 contains an 'Eco ball' to ensure detergent does not drop into the sump when filling and stays in the drum. If this Eco ball is sticking the pump may not be able to drain the water.

Answer this question

Will this part fit my appliance?

Check Now

Washing Machine Drain Pump Assembly Plaset 69132

87.78
(inc. VAT)
87.78