Get The App From Play Store!

Skip to main content

Tumble Dryer Poly-Vee Drive Belt & Bearings Kit 1991H8- 1991H8PHE Stock Number: ES548363

Genuine spare part for select models of Hotpoint, Indesit and Creda tumble dryers

Read more

Manufactured by Hotpoint

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Tumble Dryer Poly-Vee Drive Belt - 1991H8PHE

If you have a belt in your tumble dryer that has worn, stretched out even snapped, it will not be able to spin the drum in your machine - meaning your clothes could be left damp at the end of the cycle. eSpares has this replacement belt, which could be the answer to getting the drive system back up to speed in your tumble dryer.

The Poly-Vee belt (ribbed belt) looks like a flat belt but has V-shaped ribs along the inside for better friction between the drive system and the belt. eSpares could soon get you back to nice dry clothes again, with your tumble dryer performing at its best, in no time!

Specification:

  • Type: Poly-Vee
  • Length: 1991mm
  • Type of ribs: H
  • Number of ribs: 8
  • Elasticity: PHE
  • Includes: Bearings

Genuine spare part for select models of Hotpoint, Indesit and Creda tumble dryers.

Please check the list of suitable models to ensure that this spare part will fit your appliance.

Ask a Question

6 Questions and 6 Answers

I have an hotpoint ctd00p

By s4m8o - doncaster - 12 February 2014
  • Chris from eSpares
    Chris at eSpares says...

    During production the drum support wheels were replaced with the bearing pads supplied with the kit Stock Number: ES546701. In practice when the wheels seize they usually damage their wheel mountings on the base and cannot be replaced without a new base. The cabinet front is designed to accept these bearing pads (four), simply offer the left?pin into the bracket with the pad at 90% to the front and then turn to lock in place.

Answer this question

I have a Is70c TumbleDryer Bearings are OK, But Dryer is very noisey , it seems to be when it goes in reverse Question could this be a noisey water pump?

By RonH - Gateshead - 26 September 2010
  • Rory from eSpares
    Rory at eSpares says...

    Hi RonH, check out this very helpful site detailing causes of a noisy tumble dryer: http://www.dryerhelp.co.uk/diy-repair-help_2.html#cl_q2

Answer this question
By Jezzar - - 20 May 2010
  • eSparesMalindi from eSpares
    eSparesMalindi at eSpares says...

    Unfortunately we do not have a guide or fitting instructions for this part. Please seek technical advice from an engineer.

Answer this question

Hi. I have noticed from the associated picture that the rear bearing included is of the square box type. The bearing fitted to this CTD00P is the tear drop shaped unit sold seperately. Does this Matter?

By sparky999 - - 27 January 2010
  • eSparesMalindi from eSpares
    eSparesMalindi at eSpares says...

    Yes later versions of this model use the tear drop shaped bearing. This is the correct baring for your appliance: http://www.espares.co.uk/part/tumble-dryers/indesit/p/1088/805/0/0/865498/tumble-dryer-drum-rear-be.html

Answer this question

machine is hotpoint

By bone - - 08 February 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Bone, I'm afraid we don't stock bearing parts for the VTD00P. Apologies.

Answer this question
See all questions and answers

Will this part fit my appliance?

Check Now

Tumble Dryer Poly-Vee Drive Belt & Bearings Kit 1991H8- 1991H8PHE

35.05
(inc. VAT)
35.05