Oven Half-Grill Element - 1150W Stock Number: ES554264
Genuine spare part suitable for select models of Rangemaster, Falcon and Tecnik cookers
Manufactured by Rangemaster
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Oven Half-Grill Element - 1150W
If the grill is not heating up, it sounds like there could be a problem with the element. No need to panic though - eSpares might just have the solution here for you!
eSpares has this replacement grill element that could soon be fitted on your grill, to get it back to the desired temperature. This element is located at the top of your oven and is controlled by a thermostat to cycle on and off in order to maintain the temperature. A correctly working element will help ensure the oven reaches the correct temperature consistently, meaning your food will be cooked evenly.
With the help of eSpares and this replacement grill element, you could soon be back to enjoying the grill function of your oven again in no time!
Specification:
- Wattage: 1150W
- Length: 320mm
- Width: 180mm
- Bracket: 70mm
- Tags: 50mm
Genuine spare part suitable for select models of Rangemaster, Falcon and Tecnik cookers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
6 Questions and 6 Answers
The right hand side element of my Rangemaster electric grill has packed up. If I order the element, how do I get access to fit it? If it isn't the element then what else could have packed in? The left hand side still lights up and works.
-
Chris at eSpares says...
If you can see the screw head that is fixing the element bracket to the back it may be possible to remove the element from the inside without removing the back panel. It is possible the control may have failed but it is usually the element that is the cause.
-
Kaasim at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
Sometimes when the grill is turned off, the power supply trips off on the distribution board taking with it everything else via the RCB on the board. Do you know whythis might occur? 1 Answer
-
Chris at eSpares says...
The likely reason is a break down of the grille element. Replace the element first as this should resolve the problem and may not be able to prove without a Megger see video: http://www.espares.co.uk/advice/1/2145/how-to-diagnose-problems-with-your-oven
I cant get the 3 screw galvanised cover off because of the gas pipe that runs a cross the middle of it. Any suggestions please.
-
Chris at eSpares says...
It is important to not interfere with any gas pipework unless you are qualified as even a small leak could lead to an explosion. If you cannot maneuver the back plate out of the way to access the element we would encourage you to arrange for a professional to carry out this repair.
the space is a bit tight. Any tips for pulling off the connectors from the old element without damaging them? Can't really get a decent angle for normal pliers. Thanks
-
Rory at eSpares says...
Hi rogtheone, you'll just need to get the oven in to a big open space, removed from its cavity, if it's sitting in one. There's no real trick to this - you just have to do your best with the space you've got!
Will this part fit my appliance?
Check Now
