Cooker Thermal Cut-out -170°c Stock Number: ES605939
Genuine Spare Part for Select Electrolux, Parkinson Cowan, Tricity Bendix & Zanussi Cookers
Manufactured by Electrolux
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Cooker Thermal Cut-out -170°c
Make sure that your cooker is of the highest possible standard with this genuine thermal cut-out; suitable for select Electrolux, Parkinson Cowan, Tricity Bendix & Zanussi ovens.
This is Electrolux spares reference: 3115190047
3 Questions and 3 Answers
The temperature light on my tricity tiara stays on even when the oven switch is inthe off position. oven does not heat up. 1 Answer
The rings work ok. wondered if it was the thermal cut out fitted at the bottom at the back of the cooker,or maybe the thermostat.
-
Chris at eSpares says...
It sounds like the thermal cut out but it could be a faulty element. Check with a meter if available or carefully examine the element for signs of damage. for more information see our video: http://www.espares.co.uk/advice/1/2145/how-to-diagnose-problems-with-your-oven
my zanussi ZCE 7610 W keeps cutting out at about 200c would this be faulty thermal cut out ? if so where is it located? 1 Answer
part No. please
-
Chris at eSpares says...
This cut out is normally in the back of the oven near the top. Before ordering confirm the cooling fan is running correctly as this also may cause this fault.
main oven cut-out switch was replaced but now the oven is switching on/off during cooking,when I checked the parts list for Zanossi,it shows the thermal cut-out as170o C. Has the wrong part been fitted???? Appreciate your advice. regards Dave...
-
Chris at eSpares says...
It is possible the main oven is overheating causing this to cut out. Check the oven temperature by selecting a low temperature and confirm the indicator cycles on and off as it regulates. IF the indicator stays lit and the oven heats excessively suspect the main thermostat to be short.
Will this part fit my appliance?
Check Now
