Get The App From Play Store!

Skip to main content

Tumble Dryer Drum Shaft Stock Number: ES664022

Genuine spare part for select Ariston, Creda, Crusader, Hotpoint, Indesit, Jackson and Proline dryers

Read more

Manufactured by Hotpoint

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Tumble Dryer Drum Shaft

If your tumble dryer's drum shaft has worn out, there are two tell-tale signs: the drum will be making clanging noises when the machine is running, and the drum will be moving around inside the cavity of your dryer. Replace a worn out drum shaft pin with this spare from Hotpoint to restore your dryer to working order.

Genuine spare part for select Ariston, Creda, Crusader, Hotpoint, Indesit, Jackson and Proline tumble dryers. Prior to ordering, please check the list of appliances to ensure this is the right part for you.

Ask a Question

11 Questions and 13 Answers

By Anonymous - Scotland - 16 November 2010
  • The screws you remove are self tapping, so no tap is required. By Ben - Derbyshire - 30 May 2011
  • Rory from eSpares
    Rory at eSpares says...

    Hi there, the screws you need are Torx head, T25 - so the tap would correspond to this.

Answer this question

the holes on the plate are obvious to secure one end of the drum shaft, but does the pointy end of the shaft have a hole across the shaft to allow the fitment of a split pin? This is for a replacement of a Creda Excel T632CW Condenser Dryer drum shaft.

By ravingray - - 11 August 2009
  • A split pin can be used, but there is a special "S" shaped pin that goes in this cross drill hole. Always use a washer between bearing and split pin/"S" pin. By marlincar - Devonshire - 22 April 2010
  • yes this shaft is drilled to accept a pin, use the pin that is in the old shaft, not a split pin, the pin is just a single, easy to fit. By ianoliver48 - scottish borders - 26 November 2009
Answer this question
By Haley Christie - Birmingham - 28 February 2016
  • Chris from eSpares
    Chris at eSpares says...

    It may be possible but the easiest way is shown in the video attached.

Answer this question

After seeing the video I think I might need the large riveted model but both come up with the fact they are incompatible ?

By Ollie - Lincoln - 25 July 2015
  • Chris from eSpares
    Chris at eSpares says...

    This is suitable if your drum has three screws in the middle. if it has no screws you need Stock Number: ES1672507

Answer this question
By Super steve - Upminster - 14 February 2015
  • Chris from eSpares
    Chris at eSpares says...

    This depends on production. If you have 3 screws in the centre of the drum you need Stock Number: ES1562106 if welded use Stock Number: ES1672507.

Answer this question
See all questions and answers

Will this part fit my appliance?

Check Now

Tumble Dryer Drum Shaft

13.55
(inc. VAT)
13.55