Washing Machine Mains Cable & Filter Stock Number: ES800896
Genuine spare part for select Ariston, Hotpoint & Indesit washing machines
Manufactured by Indesit
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Mains Cable & Filter
The purpose of the mains filter inside your dishwasher is to prevent interference from the motor affecting other appliances in your home. So if you've got a defective interference suppressor you may find it trips your fuse board in your home. Don't panic eSpares has the replacement for you which will get your dishwasher performing to its best.
This is a genuine spare part for select Ariston, Hotpoint and Indesit washing machines.
Please view the list of appliances prior to purchase to ensure the spare is suitable.
8 Questions and 8 Answers
Does this product come in different lengths please ?
-
eSpares Staff at eSpares says...
This does not come in different lengths
When I switch the machine on at the on/off switch all the display lights flash continuosly for 2/3 mins 1 Answer
The machine wont start until all the various display lights stop flashing, then the machine operates normally
-
Chris at eSpares says...
This is likely to be a power module fault and cannot be replaced without programming. These parts make it uneconomical for this to be carried out by most customers. Should you require a fixed price repair we recommend repaircare.co.uk as they have an extensive dealer network of over 500 engineers throughout the UK. They can be contacted on 0844 557 3701 to arrange a repair.
My Machine comes on for a fraction of a second when i turn on the mains switch then nothing . 1 Answer
-
Chris at eSpares says...
This suggests the machine may have carried out a self check and found a problem. Check the motor brushes and heater as one of these may be causing the problem.
when i plug my machine in the main house fuse trips after about 2 min , as a test i have removed this module from the machine and layed it on the table , plugged it into the wall socket and turned it on and even out of the machine the main house fuse trips again. so does it sound like this part is faulty? as im sure it should not do that even out of the machine. thank you for your advice.
- it is certain that this filter is faulty due to internal leakage, replacement is a must, also check the multi pin connector is not discoloured or burnt as this may cause it to arc.
Will this part fit my appliance?
Check Now
