Get The App From Play Store!

Skip to main content

Dishwasher Heater Element - 1800W Stock Number: ES871350

Genuine spare part for select Ariston and Indesit dishwashers

Read more

Manufactured by Indesit

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Dishwasher Heater Element - 1800W

If your dishwasher isn't heating up to its full capacity it might be time to change the heating element. This heating element heats the incoming water, sterilising the dishes as they get cleaned. Luckily, eSpares have just the part that could soon restore the water temperature and get great cleaning results on every wash. 

Specification:

  • Wattage: 1800 watts
  • Voltage: 235V

This genuine spare part is compatible with select Ariston and Indesit dishwashers so prior to ordering, please check the model fit list to ensure this part is compatible with your appliance.

Ask a Question

2 Questions and 2 Answers

By Anonymous - chatham - 16 November 2010
  • i have just changed the heater element on a idl40 it is pretty straight forward but you need to disconnect waste and cold water plus mains. there is a plate on the base three screws each front / back remove the back ones first make sure you have a bucket for drain hose /water pipe and then tip machine on to its back remove the other three screws but be careful as there is a plug connector that needs un pluging you will then see the element underneath on right hand side behind wiring loom i used a torch 7/8mm 1/4 inch socket extention bar and rachet there is two purple wires and an earth that is under the fixing for element it is a bit fiddly when putting back together get someone to hold the door open when you replace element as door is sprung and the machine is on its back the rest is the reverse of dismantling and dont forget the two rubber terminal protecters By max - - 25 November 2010
  • Rory from eSpares
    Rory at eSpares says...

    Hi there, replacing this element will probably require removing the top, back or side panels of your dishwasher. Look for the point in the roof of the dishwasher where the two connection points are, and then work backwards. Sorry I can't be of any more help, and best of luck!

Answer this question

Will this part fit my appliance?

Check Now

Dishwasher Heater Element - 1800W

36.04
(inc. VAT)
36.04