Get The App From Play Store!

Skip to main content

Cooker Hood Halogen Bulb & Housing Assembly Stock Number: ES919684

Genuine spare part for select Belling and Stoves cooker hoods

Read more

Manufactured by Belling

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Cooker Hood Halogen Lamp and Housing

If your cooker is in need of a new lamp, then you've come to the right place. This handy genuine spare part, might just be what you need to restore your cooker to full working order so you're able to cook with ease once more. Order this spare today and get cracking with those delicious meals again in next to no time at all.

Specification:

  • Cap: G4
  • Type: Halogen 
  • 20 Watts
  • Volt: 12V
  • Colour: Clear

Genuine spare part for select Belling and Stoves cooker hoods.

Please check the suitable model fit list to ensure that this is the correct part for your appliance.

Ask a Question

4 Questions and 5 Answers

By none - Liverpool - 02 December 2013
  • The lamp does come apart to fit new bulbs. As the other commenter has said, slide a knife or small screwdriver in the circular gap between the metal outer housing and the metal ring holding the glass. Lever it out on one side and you can then repeat it around the slot to pull out the glass lens in it's holder. The bulb is then a simple pull out and replace. Pushing the lens holder back in is a bit awkward because you have to line up cut outs but it just takes some trial and error. I'm buying the whole lamp because I couldn't work this out originally either, and tried pulling the whole lamp unit down, bending the sprung tabs holding it in place. It's never been the same since. Note to Belling if they read this: why not just put these instructions and pictures in the manual for the cooker hood and save us all this hassle?? By Alan A - Chelmsford - 14 January 2016
  • One original bulb failed after only a few months use. I replaced it with a standard inexpensive G4 12volt 20 watt halogen capsule. It has been going for the past two and a half years and gives similar light to the original bulb. I removed the glass lens by by sliding a paring knife under the metal rim and the old bulb pulled out and the new one slotted in easily. The specs of the bulb are embossed on the reflector, btw. Do NOT remove the whole light assembly, it is held in by two springs that deform so it doesn't clip back. If you do you will have to buy another light unit or dismantle part of the hood to get the thing back in and it's very fiddly to put back together. I am not an electrician, so please understand that I have described what I did and do not recommend any course of action. By GL - Isle of Skye - 18 December 2015
  • Chris from eSpares
    Chris at eSpares says...

    This assembly looks like it uses a standard bulb like Stock Number: ES676581 but we are not able to confirm if the lamp comes apart to remove this bulb.

Answer this question
By Anonymous - - 20 April 2014
  • Chris from eSpares
    Chris at eSpares says...

    The old assembly just needs the spring clip that fixes it to the hood to be squeezed in and allow it to pass back through the mounting hole.

Answer this question
By Mike - fleet hampshire - 31 March 2014
  • Chris from eSpares
    Chris at eSpares says...

    In order for us to source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

Answer this question

I replaced 1 of the bulbs and it only lasted 3 weeks, the other has now gone do you have any info as to why they are blowing? Before it blows it goes on and off intermitantly and with a tap comes back on, do these earth on the hood?

By Magician - Halifax - 04 April 2012
Answer this question

Will this part fit my appliance?

Check Now

Cooker Hood Halogen Bulb & Housing Assembly

68.53
(inc. VAT)
68.53