Get The App From Play Store!

Skip to main content

Oven PCB Module Stock Number: ES1020883

Genuine spare part for select models of Whirlpool, Bauknecht and Ignis cookers

Product Q&A

Ask a Question

Electrical Supply to oven but no display and oven not working looks like oven is switched off at mains. (but isn't) Is this a fault with the power unit?

By Mark Jones - Swansea - 08 September 2017
  • Chris from eSpares
    Chris at eSpares says...

    For information on your problem type the symptoms into our advice centre on the link above. You can then follow the steps to help diagnose your fault.

Answer this question

My oven went pop over Christmas, I assumed it was the element so ordered one from you and fitted it, now as soon as I turn the isolating switch on the oven comes on even though the oven isn't turned on. Any ideas?

By Mr S Marsh - CLECKHEATON - 01 January 2017
  • Chris from eSpares
    Chris at eSpares says...

    The problem is likely to be a faulty control board not the controls itself.

Answer this question
By Kevin Higgs - - 03 July 2016
  • Parminder from eSpares
    Parminder at eSpares says...

    Please view our advice centre page which will give you more information on this matter, http://www.espares.co.uk/advice/1/2145 The model in this video may be different to yours, however the process should be similar for other makes and models.

Answer this question

After a recent power surge when the oven was turned on its now displaying the error code f03. Any idea what I need to repair this?

By AM - N. Ireland - 24 August 2015
  • Chris from eSpares
    Chris at eSpares says...

    We believe the F03 is an oven temperature error but it is usually caused by a faulty Power Unit Stock Number: ES1420646

Answer this question

Whenever I lose power, or need to change the time, it takes a couple of days to be able to change the time, this week we had a power cut (three days ago) and I still haven't been able to set the time to use the oven. Also recently when using the oven the display flashes, turns on/off/temp display to 160c. I also can't use the automatic cook function - could this be a PCB problem?

By Michelle Allen - Sandwich, Kent - 08 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    It is likely to be the module if the oven starts working after a few days.

Answer this question

when i set the temperature on the oven it will start to built temp and then resets to 160 (flashing) or can jump to a grill setting..... Can you tell me if this is a thermostst issue or pcb, or led readout,,,, thanks in anticipation of your reply. Tony

By Tony - wiltshire - 06 February 2011
  • Rory from eSpares
    Rory at eSpares says...

    Hi Tony, it could well be the thermostat. To find out whether it's at fault check the current running through it with a multimeter. If that's not the problem, make sure all connections from the control knobs and the PCB to the thermostat and element are secure. If you're still getting the same thing, it could well be the PCB malfunctioning.

Answer this question

Will this part fit my appliance?

Check Now

Oven PCB Module

200.16
(inc. VAT)
200.16