Universal Vacuum Cleaner Mains Cable Stock Number: ES1673454
Universal mains cable suitable for most vacuum cleaners matching the specifications
How can I change the Mains cable on the above machine please? I cannot get the vacuum cleaner apart.
-
Chris at eSpares says...
We do not have any information on this but if there is any labels carefully press them as there may be a hidden screw under one.
- I have undone all the visible screws but cannot get the covers off, any further suggestions please - am I missing something?
-
Chris at eSpares says...
It will be necessary to take the covers off to access the connections inside.
-
Chris at eSpares says...
This is listed as suitable for a vacuum and up to 13 amps. Therefore even a .75mm core we believe would be suitable. It is not suitable for continual high current use like a tumble dryer or heater.
Model No: TH71/SMO1001 Hepa Filter
-
Chris at eSpares says...
This could be used but we think your cleaner will use a 2 core cable like Stock Number: ES1673455
AS the Karcher NT301 is a Double Insulated appliance and, as such doesn't need a 3-core mains lead, how can this cable be compatible with it? Having worked in the repair trade, admittedly mainly repairing radio and audio equipment for over 40 years, I've always understood that it is not good practice to cut off or otherwise insulate the earth lead in a 3-core cable, and fit this to a double insulated appliance, which might then fail a PAT test. Most Vacuum cleaners, including two I own, are double insulated and thus fitted with two-core mains leads by their manufacturers.
-
Chris at eSpares says...
Double insulated (Class 2) products do not have any exposed metalwork that is not insulated from the electrics inside and do not need 3 core cable. If the earth connector is trimmed off and insulated it should be suitable to use this and will not cause problems when performing a 'PAT' test. Alternatively use a 2 core cable like Stock Number: ES1673453
-
Chris at eSpares says...
We do not have the cable diameter but it should be suitable for your cleaner.
I have a morphy richards 2in 1 cordless vac its the white and green model?
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
hi please could you advise,would this cable be a good replacement to use on the Hoover Spirit 2100 watt thanks in advance
-
Chris at eSpares says...
This cable is perfectly suitable for your appliance but may need to be connected with suitable terminals or connector for the machine.
-
Chris at eSpares says...
This cable would be suitable for the job but may have to be connected to the original connectors. The correct part is Stock Number: ES966178
-
Chris at eSpares says...
The correct lead for your vacuum is Stock Number: ES1613640