Get The App From Play Store!

Skip to main content

Cooker Hood Cut to Size Foam Grease Filter Stock Number: ES462032

Cut to size cooker hood filter, suitable to replace upto 470 x 970mm

Product Q&A

Ask a Question

I have just purchased these filters. It says to fit with "Indicator Points Facing Downwards". This may be a silly question, but what are the indicator points?

By roze - - 05 August 2009
  • The indicator points are the side with the printing on and go face down so that you can see them through the grill holes in your cooker hood. The printing will change colour with time and is therefore an "indicator" of grease saturation levels in the filter and when it requires relacement. By horleygirl - Surrey - 16 October 2009
  • printed on one side only. fit printed side down so it is visible when looking at hood By longlostpoet - nr Ipswich - 14 September 2009
Answer this question

My Thermor cooker hood (air recycling type) came with a metal grease filter. This has now become unusable (don't ask), and there don't seem to be any replacement available anymore. Could I use one of these universal filters? I'm not quite sure yet, how I would secure it, but it might work. I'm just worried that the air flow would be different, which might not suit the hood and damage it?

By DH - - 23 May 2016
  • Chris from eSpares
    Chris at eSpares says...

    This is a sheet of filter material and would have to be fixed on a supporting grill to be able to fit. If you are unable to locate the part on our website with this information please raise a part enquiry from the link Help Me Find The Part I Need below.

Answer this question

I have a recirculating hood and my question is do i need to use a carbon and grease filter or just a carbon filter because the manufacturer currys are not very clear on these essentials visor hood.

By Anonymous - UK - 14 September 2014
  • Chris from eSpares
    Chris at eSpares says...

    You do not need a carbon filter if you are venting out only if you recirculate the air and want to remove smells.

Answer this question
By dai - pontypridd - 28 September 2011
  • Caitlin from eSpares
    Caitlin at eSpares says...

    These cooker hood grease filters are complete with 'saturation indicators' which will change colour when they need to be replaced. The time between changes will be dependent on how often you use your cooker hood.

Answer this question
By gillgws - Harrogate - 21 February 2011
Answer this question
By rikscha - - 05 August 2010
  • You generaly have carbon filters on recycleing extractors as the are designed to neatralise the cooking smells and stop grease. where as a grease filter is fitted to cooker hoods that extract to outside where cooking smells are not a problem as they are pumped outside and all it needs to do is stop the grease from gumming up you fan. By Rob - Bracknell - 08 December 2010
Answer this question

I have a Homark recirculating cooker hood with carbon filter but recently condensation has started collecting and falling onto the hob and settling on surrounding tiles/cupboards etc. Should I replace the carbon filter with the grease filters or carry on with carbon filters? Thank you.

By Auntielala - Brighton - 08 March 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Auntielala, I would recommend you carry on with the carbon filters, as parts built specifically for certain models are always preferable to universal parts.

Answer this question

Will this part fit my appliance?

Check Now

Cooker Hood Cut to Size Foam Grease Filter

8.89
(inc. VAT)
8.89