Get The App From Play Store!

Skip to main content

K5-K7 Pressure Washer Vario Lance Stock Number: ES537950

Get into hard to reach areas with this powerful vario lance, that will give you power and reach when you need it!

Product Q&A

Ask a Question

There is definitely no leak from the appliance and the motor is still running. However i noticed that the vario lance itself will not adjust the pressure when turned and stays on a moderate pressure no matter the position. I was wondering if the lack of pressure could be due to the lance and if buying a new one would fix the problem, or if there is an entirely different problem. Many Thanks

By Kerry Kay - Stockport - 13 May 2018
  • Dean from eSpares
    Dean at eSpares says...

    please see our video for more help www.youtube.com/watch?v=4WZgprLndhU&t just copy and paste into your browser.

Answer this question
By Len - Peterborough - 19 March 2016
  • Chris from eSpares
    Chris at eSpares says...

    This could be used but is desined for a higher flow so Stock Number: ES659756 may work better.

Answer this question
By Anonymous - dunfermline - 08 August 2014
  • Chris from eSpares
    Chris at eSpares says...

    The high pressure should not be significantly effected by hose length due to the low volume of water used. This lance can vary the output jet size thus varying the pressure and force of the jet.

Answer this question

I have a Lavor pressure washer but vario is faulty. Would a Kacher Vario fit. I have a karcher adaptor for a patio attachment.

By Stanboy - Kingshurst/Birmingham - 16 June 2014
  • Chris from eSpares
    Chris at eSpares says...

    If you have an adaptor to fit a Karcher patio cleaner the Vario lance will fit into it.

Answer this question

my pressure lance leaks right along its length through the joint seams is there a seal servicing kit or should i just order a new one

By Anonymous - aberdeen - 18 April 2010
  • eSparesMalindi from eSpares
    eSparesMalindi at eSpares says...

    Unfortunately we cannot give technical advice. Please get help from a technician about the usability of the part before replacing it.

Answer this question
By oscar30 - - 05 February 2010
  • eSparesToby from eSpares
    eSparesToby at eSpares says...

    Yes a new one will fix the problem, it is not a fault with the washer itself.

Answer this question
By danandfaye - - 21 May 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi danandfaye, this lance fits K5 to K7 series, and the other lance is for K1 to K4 washers.

Answer this question