Pressure Washer K4-K7 Suction Hose and Filter Stock Number: ES546259
Genuine kit to operate your pressure water using water from ponds, water butts or tanks
- I have used my K2 connecting straight to the outlet with a hose lock connector with jubilee kit, primed from tap first, worked fine, should use an inline filter though.
-
Chris at eSpares says...
See Stock Number: ES1137002
Hi, the packing seems to indicate 5m but the product description indicates a length of 3m. Can you confirm which is correct. 1 Answer
-
Dean at eSpares says...
Hi DJ thank you for question, the correct length is 5m. I have now updated our information
-
Chris at eSpares says...
This is for domestic pressure washers in the K4-K7 series. If used it could damage your pressure washer.
-
Chris at eSpares says...
If gravity fed from a water but yes it would be possible to use if joined but you may have to find a connector.
your help would be greatly appreciated !
-
Chris at eSpares says...
See Stock Number: ES546259
is the water pressure form the butt as powerful as from the mains or is their a loss of pressure 1 Answer
-
Chris at eSpares says...
This is purely down to the pressure washer and not influenced by the water supply.
can i use the washer suction hose to empty water from a 10 ft swimming pool into water butts 1 Answer
-
Chris at eSpares says...
A typical pressure washer will pump between 400 and 500 litres per hour. Even on a small pool it would take days to empty. The machine is not designed for this purpose.
-
Rory at eSpares says...
Hi Powermax, this hose needs to be connected straight in to the washer. If it is connected to any other hose or connection, there won't be enough pressure for the filter to work.