Fan Oven Element - 1800W Stock Number: ES555487
Spare part for select Beko, Belling, Leisure, Blomberg and many other brands of cookers
Does this element fit from the rear of the oven with machine screws onto the element fixing plate 1 Answer
-
eSpares Staff at eSpares says...
The element is normally secured from the inside, remove the back panel and you will see the element fixing screws.
I have removed the front cover from inside the rear of the oven only to find that the element is secured by two screws at the REAR of the actual cooker! I don't know if this is the correct element or the higher rating element is or do they both screw in from the rear of the actual cooker and not from inside the oven?? Can you advise as I need to order part as soon as possible. Thanks
-
eSpares Staff at eSpares says...
This element screws from the inside but make sure you check the element is correct for your model before ordering.
Thanks for the video, but I stupidly put the terminals back on incorrectly and plugged the live to earth and v.v. When I switched on there was a pop and now nothing works. element still show OK on a ohm meter, but there's no power to any of the three ovens. Any idea please? Is there a fuse or cutout I need to check/change?
-
eSpares Staff at eSpares says...
If the cooker is hard wired it will have taken out the fuse in the fuse board or if it has trips it would have tripped that circuit, check that before suspecting anything else.
i've ordered my replacement element but your video shows it held in place by 3 screws? mine seems to have screw threads but no screw heads? as if it was fitted from the back? how do i get it off please?? 1 Answer
Lamona Fan Oven Element - 1800W for HJA5110 , left oven
-
Dean at eSpares says...
You would need to take the oven out to gain access at the back of the oven, the screws are removed from the back
Hi. Do you know if the fan oven (not the multi-function oven) element on the Leisure HAP5001 can be replaced from the front? Thanks. 1 Answer
IRequire element for my 2013 Leisure dual fuel cooker, modelCMCF 96X.To fit Tall fan oven. Old element is a 240v 2100W rating. On Espares web site, I am directed to compatible product ES555487. This element is only 1800W. Is this a problem? 1 Answer
-
Chris at eSpares says...
This is the correct element for your oven The manual may be adding the fan and lamp current as well in the specifications.
The wattage on the replacement element fitted by an independent appliance engineer is 2400 and only has 2 connectors (the earth has been disconnected) Will this element just be slower to heat up? Can I just reconnect the earth??
-
Chris at eSpares says...
If your original was 1800 watt but the replacement is 2400 then it will heat up quicker. It is not necessary to reconnect the earth to this element as it will be earthed through the chassis of the cooker.
I had to damage the fixings to remove the faulty element so will need new fixing screws. I ordered this before removing the faulty element and had planned to use the existing fixings.
-
Chris at eSpares says...
Elements are supplied without fixing screws. Suitable screws can usually be supplied by car spares or DIY stores.
Will the above fit beko oven. Numbers on old element are 1S 1S AH 230v. 7A180192 1800w needed urgently. Thank you. 1 Answer
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
Will this part fit my appliance?
Check Now