Get The App From Play Store!

Skip to main content

Tumble Dryer Fan Motor & Capacitor Kit Stock Number: ES968545

Genuine spare part for select models of Ariston, Creda, Hotpoint & Proline tumble dryers

Read more

Manufactured by Indesit

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Tumble Dryer Fan Motor & Capacitor Kit

If the motor in your tumble dryer is broken or malfunctioning, you will need to replace it. A defective fan motor could be the reason for hot air not being distributed correctly within your tumble dryer. This replacement fan motor kit will restore functionality back to your dryer and will have it working as good as new again. 

This motor fan kit is a genuine Indesit spare part and fits select models of Ariston, Creda, Hotpoint & Proline tumble dryers.

Please check the suitable model fit list to ensure that this is the correct part for your appliance.

This is Indesit spares reference: C00194688

Ask a Question

4 Questions and 7 Answers

By Jase - Daventry - 28 November 2018
  • Hi ya i have had that problem i found out the heater element was wet so I dryed it with the hairdryer and put it back on and it works fine By Damion Hall - Birmingham - 21 December 2018
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    Test the heater with a multimeter as that is the most likely part to trip the electrics.

Answer this question

Motor Fan Kit Type 351

By jeff - aberdeen - 17 December 2013
  • I agree with Chris, I though I needed new brushes as the drum was slow to turn, on inspection found it was an induction motor and decided to try and replace the capacitor first. It took all of 2 minutes to replace and test, dryer is now good as new! By Nicola - - 05 January 2016
  • Chris from eSpares
    Chris at eSpares says...

    This motor is an induction motor and does not have brushes. A common problem with this type of motor is the failure of the capacitor which results in low motor torque and not turning.

Answer this question
By Anonymous - Wales - 06 November 2013
  • The 2 bearings in the motor are 6001 series 12x28x8mm (metal shielded) and cost approx. £2 each delivered on ebay. On mine the inner race of one had rotated on the shaft wearing down the 25.4mm spacer by about 0.8mm. This wear can be accommodated by a number of 0.2mm or 0.3mm M12 (12mm hole) spacers. I fitted a new bearing, with bearing adhesive and spaced correctly. Total cost £4.10. It will give it a few more months of use. However, my opinion is that the original motor is poorly engineered ie cheaply made with poor tolerances. The two halves of the bearing housings are pressed steel held together by 4 self-tapping screws. By pjc - uk - 01 January 2019
  • Christopher from eSpares
    Christopher at eSpares says...

    There are no motor bearings available from the dryer manufacturer, If these are needed then replace the motor.

Answer this question
By lennie - salford/ manchester - 12 November 2013
  • Try replacing the capacitor first 9 times out of 10 that's the problem By Appliance knight - Wicklow, Ireland - 25 January 2014
Answer this question

Will this part fit my appliance?

Check Now

Tumble Dryer Fan Motor & Capacitor Kit

178.92
(inc. VAT)
178.92