Get The App From Play Store!

Skip to main content

Refrigerator Control PCB Module Stock Number: ES1247946

Genuine spare part for select models of Beko and Blomberg fridge freezers

Product Q&A

Ask a Question
By A H - - 20 November 2017
  • Which is it likely to be. Cannot afford to get it wrong. There is white frost on top half of fridge and it freezes everything . Thanks By J.S - Uk - 01 December 2017
  • Chris from eSpares
    Chris at eSpares says...

    Your problem will either be this PCB or the sensor that cannot be replaced as it is foamed into the insulation.

Answer this question

light comes on fan is running, but no cooling in fridge or freezer

By glenn - nottingham - 07 January 2020
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    We have a video to help diagnose problems www.youtube.com/watch?v=duTWh83nVdA&t just copy and paste into your browser.

Answer this question
By Gudrun Mitchell - DUNDEE - 02 December 2019
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    Check the TOC which is located on the compressor and you will need to test the compressor with a multimeter to determine if it has failed.

Answer this question
By MS - Sussex - 08 July 2019
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    We have a video to help diagnose the issue www.youtube.com/watch?v=duTWh83nVdA just copy and paste into your browser.

Answer this question

BEKO CFD6914APB

By ALAN MALCOLM - W1 – British - 12 March 2019
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    No, the thermostat would be a separate part.

Answer this question

Beko fridge / freezer model number CDA648F

By Robert Sokell - MERSEYSIDE - 19 February 2019
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    It is likely to be either the control board or the sensor, the sensor is not replaceable as it is inside the foam lining but check the board for any signs of damage.

Answer this question

After a mains power failure the device is now stuck on defrost. When power is applied the compressor runs for about 5 seconds. There is a 'click' and the compressor stops and the cooling fan starts. This condition continues for hours.

By RDC - - 03 September 2018
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    The click sounds like the TOC on the compressor is going out, check for any signs of damage and replace if required.

Answer this question

fridge light is still on but neither freezer or fridge is working ,make beko, model number is gnev221apb,

By john braid - glasgow - 25 June 2018
  • Dean from eSpares
    Dean at eSpares says...

    The humidity light on your Beko fridge indicates that there is high humidity (a large amount of moisture in the air) internally, which is good for keeping food fresh. It is normal for this light to be on.check the ventilation of the appliance as due to the hot weather it could be causing the issue.

Answer this question

Richard F says just unscrew the cover... The cover to what?

By Bob C - Essex - 02 March 2018
  • Dean from eSpares
    Dean at eSpares says...

    We believe the PCB is located at the back of the appliance at the top, there will be a cover over the PCB held in with screws.

Answer this question

My fridge is freezing in the two top sections even though the temp switch is at the lowest. It's freezing my food in the bottom half. It's done this a few times before and I turned it off for a few days and it worked but it doesn't work this time.

By N L Exton-Russell - Derby - 11 September 2017
  • Chris from eSpares
    Chris at eSpares says...

    The problem is likely to be either this control board, or the sensor that cannot be replaced in the lining of the fridge.

Answer this question

Will this part fit my appliance?

Check Now

Refrigerator Control PCB Module

42.33
(inc. VAT)
42.33