Get The App From Play Store!

Skip to main content

Oven Door Seal Stock Number: ES545679

Genuine spare part for select models of Stoves, Belling, and Diplomat ovens

Product Q&A

Ask a Question
By Anonymous - BN8 6PW - 05 December 2014
  • Chris from eSpares
    Chris at eSpares says...

    We do not have information on this but looking at the seal profile it suggests it is fitted into a channel around the cavity. We think you should be able to just pull the old seal out and lubricate the new seal with liquid soap and push into the gap with the help of an old credit card. If this does not work you may have to loosen or remove the surround from the cavity.

  • stoves 600g built-in gas oven / grill. model no 444445107. serial no 71124842 By mr m dagnall - coal aston dronfield s183ap - 19 October 2015
  • Chris from eSpares
    Chris at eSpares says...

    In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

Answer this question

our model no is 058585102 and the seal does not go over the chrome bar at the top of the door surround letting hot oven air out is this meant to be like this ? or will a new seal completely surround the aperture to the door??

By peter - Stratford upon Avon - 03 December 2010
  • Peter is right the 058585102 has a gap at the top about 4 inches across in the middle. I need to replace the seal on such an oven and wondered if it was actually missing from the top middle bit but after reading Peters above I think not. Just to clarify the Stoves 058585102 EFA600H has a four sided seal. Full left and right and bottom. The top also has the seal but in the middle top there is a chrome bar with no seal aperture its about 4 inches long. Hot air does escape when the oven is on. Cant remember whether this is right or not. By Varkanoid - Wakefield - 04 May 2013
  • Rory from eSpares
    Rory at eSpares says...

    Hi peter, this seal is roughly 2m long. It's three sided - it's designed to fit round the top and the two sides of the oven. It shouldn't be fitted round the bottom rather than the top; as you know heat rises so will escape if the top isn't sealed.

Answer this question

Is it easy to fit?

By CluelessPete - - 06 August 2009
  • This item consists of one length of door seal and is idiot proof to fit as you just pull out the old and push in the new By tunnelvision - West London - 16 March 2010
  • eSparesToby from eSpares
    eSparesToby at eSpares says...

    Yes door seals are very simple to fit, you just have to press them into place and at most clip them in the corners.

Answer this question
By Amber Baker - Exeter - 07 August 2018
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    We do not have information on this but looking at the seal profile it suggests it is fitted into a channel around the cavity. We think you should be able to just pull the old seal out and lubricate the new seal with liquid soap and push into the gap with the help of an old credit card. If this does not work you may have to loosen or remove the surround from the cavity.

Answer this question

We have the Stoves 720EF 444445124 Double oven, is this long enough to replace both seals?

By R - - 05 March 2016
  • Chris from eSpares
    Chris at eSpares says...

    No, this is for the main oven door only.

Answer this question

we have just bought a recommended match seal made by New World ES54679 and wonder if anyone else has done it

By Lily - kent - 06 January 2015
  • Chris from eSpares
    Chris at eSpares says...

    We have no information on fitting this seal but looking at its cross section it appears to have an arrow head shape on one side. This suggests the arrow head will push into a narrow slit around the cavity and then expand to hold in place. Firmly pull the seal out of the gap before pushing the new seal in. If it is difficult to refit lubricate the seal with a damp cloth and a little washing up liquid on the 'arrow head'.

Answer this question

I have read previous questions and answers but am still none the wiser. Could someone please post simple instructions as to how the seal should be fitted? Surely it is supposed to prevent any heat loss at all so should cover the metal plate at the top?

By clive - yorkshire - 26 December 2014
  • Chris from eSpares
    Chris at eSpares says...

    In order for us to answer your question please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

Answer this question

Hi The seal on our oven in our new house is broken (no manuel) and it also has a metal bit at the top so the seal doesn't go all the way around, should there be a seal all the way around? Lots of heat is escaping! The seal is a push fitting into a grove, no clips, do you have a replacement for it please. I've taken pics if that helps let me know Many thanks Hayley

By Hayleybales - Devon - 18 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    Unfortunately we are unable to provide the dimensions of this part. The parts listed on our website are all model and serial number dependant (apart from universal parts). In order for us to locate the correct spares for your appliance we would need the model information requested. Without this we cannot guarantee that the part ordered will be the correct one for your appliance.

Answer this question

I see in your earlier answer that the seal is to be fitted to the top and the sides. My Diplomat has been untouched since new and the seal fits to the sides and bottom where there is provision for it. Part of it goes around the top but there is a chrome piece top centre top that has no seal around it. Are you certain that the whole of the top should be sealed as there does not appear to be any provsion on the top centre for a seal?

By Ken - Essex - 21 May 2011
  • Rory from eSpares
    Rory at eSpares says...

    Hi Ken, I've not seen a three-sided seal fit at the bottom before, but I can only recommend fitting the new seal in exactly the way the old one was fitted!

Answer this question
By Anonymous - - 24 March 2010
  • eSparesMalindi from eSpares
    eSparesMalindi at eSpares says...

    Please contact our sales department with your model details so that we can confirm if this door seal kit is for both oven doors of your appliance.

Answer this question

Will this part fit my appliance?

Check Now

Oven Door Seal

61.86
(inc. VAT)
61.86