Get The App From Play Store!

Skip to main content

Vacuum Cleaner Motor - 240V - DC07 DC14 Stock Number: ES966646

Genuine spare part for select models of Dyson vacuum cleaners

Product Q&A

Ask a Question
By Mayan - Ruislip - 26 February 2010
  • how fit the wiring on a dc07 colour code By Anonymous - sheffield - 31 July 2013
  • eSparesMalindi from eSpares
    eSparesMalindi at eSpares says...

    Please speak to an engineer for technical support on fitting this part.

Answer this question
By Richard Foulser - Sale - 13 August 2019
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    The part supplied is just the motor, if you require tools to replace the motor see our range https://www.espares.co.uk/search/gc2027/home-and-office/diy/screwdrivers just copy and paste into your browser.

Answer this question
By Nigel - Doncaster - 10 June 2016
  • Chris from eSpares
    Chris at eSpares says...

    We believe this may be a 1600 watt motor but cannot confirm this.

Answer this question

the description on this site states that the product is an actual dyson product. Can you confirm that this is correct?

By Mick - Mirfield, West Yorkshire - 14 March 2016
  • Chris from eSpares
    Chris at eSpares says...

    This is a genuine Dyson spare part.

Answer this question

My Dyson DC07 Origin has packed up after 7 great years of service, sadly they dont make this model anymore and I have tried the subsequent models but cant surpass this one, however it was making a funny rattling sound when my wife was using it and she switched it off as she said it smelled odd, latter when I plugged it it in it make a very loud rattling sound, then a growling sound, smelled of burning and slowly died (in about 60 seconds), I suspect this to be the motor. I am about to buy a new motor from you and as you say it looks a bit fiddly but how hard can it be? my main question is do you think it is the motor and is the new motor you sell the same suction and power as the original one? Thank you and kindest regards

By FTK - South Tyneside - 25 November 2015
  • Chris from eSpares
    Chris at eSpares says...

    If the machine does not run properly with the belt and canister removed then it is very likely that the motor has failed.The new motor should be as powerful as the original fitted.

Answer this question

Why does my vacumn make a very loud noise when it comes back over, yet does not when going forward.

By bobhadley - north shields - 30 August 2015
  • Chris from eSpares
    Chris at eSpares says...

    remove the drive belt and check the bearings on the brush roller.

Answer this question
By D J - - 10 August 2015
  • Chris from eSpares
    Chris at eSpares says...

    It is likely the motor is faulty if you have tried replacing the fuse and still have a problem.

Answer this question
By HG - Cardiff - 07 April 2015
  • Chris from eSpares
    Chris at eSpares says...

    We believe this is a 1400 watt motor.

Answer this question

I was told my Full gear has a more powerful or better motor than others hence being more expensive.... but this motor fits any DC07 cleaner. Does this mean I will be installing a less powerful motor? Otherwise what is the difference between a full gear and any other DC07?

By HG - Cardiff - 25 March 2015
  • Chris from eSpares
    Chris at eSpares says...

    This is the correct motor for a Dyson DC07 'Full gear' model.

Answer this question

The clattering sound only seems to last 5-10 seconds and only on start up. Doesn't appear to be related to the brushes or belts. After start up the sound doesn't continue. Is this a motor problem?

By sketchpad - - 30 November 2014
  • Chris from eSpares
    Chris at eSpares says...

    It is more likely to be the brushes or the belt so try disconnecting the belt to identify if the problem continues.

Answer this question

Will this part fit my appliance?

Check Now

Vacuum Cleaner Motor - 240V - DC07 DC14

78.62
(inc. VAT)
78.62